AUTOOL CT180 Fuel Injector Cleaner & Tester

AUTOOL CT180 is a fuel injector cleaner and tester machine with a 4-inch high-resolution touch screen. It realizes automatic cleaning, testing and live monitoring of dynamic values of 4-cylinder engine injectors through intelligent design. Different testing conditions can be set to test the injectors, such as sprayability test, leakage test, injection flow test, etc. The whole working process of CT180 can be completed by touch screen or knob operation, which can be a brand new experience for the auto repair industry.

AUTOOL CT180 is an expert in injector solutions, featuring 7 injector-specific functions

  1. Ultrasonic cleaning: It can clean several injectors at the same time and completely remove carbon deposits from the injectors.
  2. Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
  3. Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
  4. Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
  5. Automatic test: To test injectors by simulating different working conditions.
  6. No-disassembly cleaning: Direct cleaning without disassembling the injectors, this function is an additional function, which requires special adapters.
  7. Settings: The Settings interface is used to set the default values whenever the device is started.

Smart touch screen design

Designed with a 4" high resolution touch screen, all testing functions can be completed by touch screen operation. After testing, the test fluid can be drained out by pressing the button on the control panel.

Automatic test:

Auto test contains all of the above tests. According to the preset mode, it can simulate the working condition of the engine and automatically test the comprehensive performance of the fuel injectors.

Uniformity/Spray ability test:

Uniformity test is to find out if the flow of different injectors meets the requirement or specifications under the same working condition. This test can reflect the comprehensive influences on the injector caused by electrical nature, bore variation and clogging. Spray ability test is to inspect the spraying performance by observing the injectors.

Leakage test:

Leakage test is to inspect the sealing conditions of the injector needle valve under system pressure and to find out if the injector is dribbling. Bright background lights can help to clearly see the various conditions during injector testing.

Injecting flow test:

Injecting flow test is to check if the injecting flow in 15 seconds meets the specifications for injecting amount. The deviation reflects the wear or clogging in the injector, instead of electrical parameter variation.

Test level gauge & Pressure gauge

It allows you to observe the amount of test fluid and the test fluid can be recycled.
It allows you to observe the pressure during test to avoid damage to machine or injectors caused by excessive pressure.

How to choose test fluid?

The test fluid is used to test and judge whether the performance of the fuel injector is in good condition. It is a colorless and transparent liquid with no irritating odor, non-corrosive, and not easy to emit. Its function is to simulate various working states of the fuel injector as a medium. In order to achieve the best test effect, it is recommended to use professional automotive injector test fluids. If it is not available locally, as an alternative, it\'s recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the test fluid.

How to choose cleaning fluid?

Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid. If it is not available locally, it\'s recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the cleaning fluid, but note that the effect may not good enough.

How does the CT180 work?

Ultrasonic Cleaning:

  1. Add the cleaning fluid and put the injectors into the ultrasonic cleaning bath.
  2. Connect the pulse signal lines and select the item 1 Ultrasonic Cleaning function to start.

Ultrasonic cleaning bath size: 153x87x67(mm), power: 70W.

Injector Testing

  1. First add the test fluid, then install the injectors on the fuel distributor, and fix them with bolts.
  2. Different functions can be selected to test to see if any of the injectors are leaking or blocked.

Packing list:

  • 1pc* AUTOOL CT180 Fuel Injector Cleaner Tester Main Unit;
  • 1pc* Ultrasonic cleaning set (including tray, cover and bracket)
  • 2pcs* Power Cable(for connecting power supply);
  • 1pc* Toolbox (for accessory storage)
  • 1pc* User Manual(Instructions)
  • 4pcs* injector pulse signal line (used to connect the signal line connector of product end and the injector pin to transmit the pulse signal)
  • 20pcs O-ring gasket Φ7.12.65 (for sealing the joint between injectors and oil separator)
  • 4pcs O-ring gasket Φ152.65 (for sealing the junction between injectors and oil separator)
  • 3pcs* Plugs for oil separator(used to block the holes on the oil separator)
  • 4pcs* Top inlet connectors (M12 coarse thread) 【for connecting the top of the injector and the oil separator hole】
  • 4pcs* Top inlet connectors (Swiss thread) 【for connecting the top of the injector and the oil separator hole】
  • 4pcs* Top inlet connectors (Φ10.5) 【for connecting the top of the injector and the oil separator hole】
  • 4pcs* Top inlet connectors (Φ13.5) 【for connecting the top of the injector and the oil separator hole】
  • 4pcs* Reverse flush connectors (Φ16.2) 【for connecting the bottom of the injector and the oil separator hole】
  • 1pc* Oil separator assembly set(includes fuel distributor, adjusting bolt, knurled nut, compression screw)
  • 1pc* Filling funnel (for adding test fluid)
  • 1pc* Oil drain wrench (used to install and remove oil drain screw)