AST609 Pulsating Brake Fluid Exchanger
AST609 adopts the brand new pulse exchange technology, which continuously sends out pulse signals at certain time intervals to constantly deliver high-frequency pressure output to the brake fluid pipeline. The application of pulse in the brake fluid exchange machine solves the problem of air bleeding from the pipe, while the powerful impact also takes away the dirt and impurities adhering to the inner wall of the pipe, which both saves working time and improves efficiency.
Dual pressure mode
AST609 brake fluid exchanger comes in standard mode and expert mode according to the user's operating habits. The standard mode has an output pressure of 1.5-2.0 bar, and takes no more than 8 minutes to exchange oil under normal conditions. Whereas the expert mode has an output pressure of 2.0-2.5 bar and takes no more than 5 minutes to exchange oil under normal conditions. This allows users to choose different modes as needed.
Ergonomic design
AST609's housing is all aluminum and corrosion-resistant. The handy and easy-to-lift handle allows you to carry the machine around easily. The hooks are designed to keep the power cord and outlet tube storage in order. A visual pressure gauge allows a real-time display of working pressure. After selecting the working mode, the equipment can be started with one button. It is easy to use and saves unnecessary and tedious steps. Simply one person can complete all steps.
Wide compatibility
AST609 Pulsating Brake Fluid Changer is equipped with 7 different adapters. Suitable for most models in Europe, America, and Asia, for Dot3, Dot4, and Dot5.1 brake fluid standards.
Various power supply modes
Support 12V car battery power supply, as well as 110V/220V power adapter power supply.
Instruction of AUTOOL AST 609 Brake Fluid Exchanger
- Add the new brake fluid into the new brake fluid bottle.
- Connect the input hose and pressure-balanced hose to the brake fluid bottle.
- Connect the output hose to the car brake fluid reservoir through the adapter.
- Connect the fluid recycling bottles to the vehicle brake fluid four sub- cylinders.
- Select Standard Mode or Expert Mode.
- One button starts, and then observe and wait until the brake fluid exchange is completed.
Precautions
- Do not mix DOT5 with DOT3 and DOT4 because the base oil composition differs. The bleeding sequence during fluid exchange needs to follow the principle of "far to near from the master cylinder or brake pedal". For left-hand drive vehicles, the order is "right rear wheel → left rear wheel → right front wheel → left front wheel", bleeding, in turn, to ensure that the discharge of clean fluid and no air bubbles.
- Please do not start driving immediately after the brake fluid exchange is completed, it needs to be checked to make sure there are no leaks in the pipeline. Start the vehicle, keep it idling in place and press the brake pedal to ensure that the pedal resistance gradually increases and that the brake fluid pressure is maintained. Then perform an internal road test to confirm that the braking performance is normal before driving on the road.
Packing List
- 1pcs * AUTOOL AST609 brake fluid bleeder exchanger main unit
- 1pcs * User Manual
- 1pcs * Certificate
- 1pcs * Fluid recycling bottle(1.5 L)
- 1pcs * New brake fluid bottle (1 L)
- 7pcs * Adapters
- 2pcs * Power cables 110V/220V
- 1pcs * Power Adapter
- 1pcs * Power clip cable