Working Principle:
The AUTOOL FN602 is designed to test and clean fuel injectors by recreating real engine operating conditions through electronic pulse control. By adjusting pulse width and frequency, the system drives injectors at different simulated engine speeds, allowing technicians to observe their performance under various working states.
In the testing stage, the machine circulates test fluid through a sealed system, enabling side-by-side comparison of up to four injectors. Key parameters such as spray pattern, fuel delivery consistency, leakage, and atomization can be clearly evaluated, helping identify performance differences or faults.
For cleaning, the FN602 uses ultrasonic waves to break down stubborn deposits like carbon buildup and residues. This process effectively cleans both internal passages and external surfaces of the injectors. By combining testing and cleaning functions in one unit, the FN602 helps restore injector performance and improve overall fuel system efficiency.
Cleaning Fluid Heating Function: The FN602 Injector Cleaner has a built-in intelligent thermostat function that quickly heats 2000ml of cleaning solution to 45℃ and maintains that temperature.
Wide Range of Adaptations: Equipped with 9 adapters, adapters specifically for BMW injectors, and connectors for different sizes of automotive injectors, it is capable of testing most automotive injectors on the market.
Protects Injectors: The self-protection function protects injectors from damage when detecting GDI injectors.
Comprehensive Functionality: The AUTOOL FN602 Injector Cleaner offers 3 cleaning modes and 10 test functions for efficient cleaning and thorough diagnostics to ensure optimal performance of automotive injectors.
High Cleaning Efficiency: With 28kHz high-frequency ultrasonic cleaning and 45°C heating, the system effectively removes oil, carbon, and gelatinous residues from automotive injectors, ensuring a fast and thorough cleaning process.
Multi-voltage Selection: The FN602 provides adjustable voltage output (12V, 70V, 120V) for different injectors. It intelligently recognizes the required drive voltage for GDI injectors, preventing damage due to incorrect settings and avoiding fuel injection or alarm signals.
Intelligent Design: The 4-cylinder 100ml explosion-proof glass tube is designed to test up to 6 injectors simultaneously. The durable explosion-proof glass prevents fluid leakage and ensures safe and reliable operation.
Adjustable Working Time: The cleaning time of the injectors can be freely adjusted according to the dirtiness of the injectors, up to a maximum of 10 minutes.
Three-year Warranty: For damages caused by non-human factors, AUTOOL promises to provide free replacement parts within three years. If you have any requests, please feel free to contact us, and we will respond promptly within 24 hours.
AUTOOL FN602 GDI Fuel Injector Cleaner & Tester Machine Functions
Heated Ultrasonic Cleaning: Utilizes ultrasonic waves and an automatic heating system to increase cleaning efficiency, ensure thorough cleaning of injectors, and improve fuel atomization.
Reverse Flushing: Reverse flushing is a way to clean the injectors with the test liquid flowing from the outlet to the inlet of the injector. Reverse flush may remove the dirt inside the injector or the injector Strainer (Only for the top fuel supply injector).
No-disassembly Cleaning: This is Direct cleaning without disassembling the injectors. This function is an additional function that requires special adapters.
Idling Test (0-20ms): Simulate the engine idling speed and test the state of the fuel injector.
Medium Speed Test (0-7.5ms): Simulate the engine running at medium speed and test the state of the fuel injector.
High-speed Test (0-4ms): Simulate the high-speed performance of the engine and test the state of the fuel injector.
Acceleration Test: Simulate the acceleration state of the car and test the performance of the fuel injector.
Shifting Speed Test: Simulate the shifting state of the car and test the working performance of the fuel injector.
Leak Checking Test: Tests the sealing condition of the fuel injector.
Idling Spray Value Test: Simulate the engine’s idling state and test the spraying performance of the fuel injector.
Medium Speed Spray Value Test: Simulate the engine’s medium-speed state and test the spraying performance of the fuel injector.
High-speed Spray Value Test: Simulate the high-speed state of the engine and test the spraying performance of the fuel injector.
Pulse Injection Test: Pulse Injection Test: Simulates various dynamic operating conditions by intermittently injecting fuel at different pulse widths and frequencies, allowing for a comprehensive assessment of the injector’s response time, atomization quality, and overall performance.
